Fall Leaf Written Pattern & Stitch Diagram Update

Here's my finished example worked from this pattern and then wet blocked.

Previous post: http://theunknownorchard.blogspot.com/2015/09/fall-leaf-pattern.html

Bit of an update.  This seems to be pretty popular so I've revisited the pattern and made some changes as well as actually writing a row by row pattern.  This is quite an advanced pattern and not easy to write so leave me a comment below if you need some clarification or find a mistake.  I think the final result has come out pretty nice after some blocking.

Notes:

• When working on a right side row into the top of a double crochet from the previous round, I like to work into the back loops only to make the front loops pop out and create a line in the work.  When working on a wrong side row, work into the front loops only.
• You may need more or less chains to form the initial ring before you start.  There is not gauge for this, so find what works for you.  I found 12 chains worked well to place 24 double crochets into the ring.
• As you go, you will work less and less of the whole round as this is what causes the leaves to be different sizes.  For the sides of the leaves to taper down to a point, you'll need to omit some double crochets on the edges, which I've tried to explain in the pattern.  For me, I used the basic rule of leaving a gap of 3 double crochets unworked on the edges and one double crochet at the very edge.  You may find you like more or less to be unworked depending on the look you're going for.
• Previously I chose to finish the right half of the leaf as I went and the left with a final row of single crochet.  In this version, there will be a final row that works around the entire leaf so that the result is even all the way around.  The final row is easy to work, but hard to follow in a written pattern because it's so repetitive.  Just remember that you work a single crochet into the top of all the double crochets.  When you come to a chain space, you'll work (2 sc, picot, 2 sc) and when working into the standing stitches, you'll work 2 single crochet around each one as if you're working around a chain.  The diagram should help to explain all this.
• I've also changed the number of chains in the center of leaves from 2 to 3.  I like it a bit more roomy to work into.
• I use standing double crochet stitches frequently for the first stitch in a row.  You can do chain 3 if you like.  It should not make too much of a difference as you will cover a lot of them up later.  The diagram uses 3 chains to make it easy to see what you're doing and where the rows join.

Updated stitch diagram.

Chain 12 and join into a ring.
[Right side] rows: work into back loops only and chain spaces
[Wrong side] rows: work into front loops only and chain spaces

1. [Right side] Make a DC standing stitch: insert hook into the ring to yarn over. DC 23 more into the ring and join to the top of the first standing stitch (24)
2. [RS] Chain 1 and sc in same stitch. (Chain 3 and skip 1 stitch.  Sc in the back loop of the next DC.) Repeat around, slip into first sc.
3. [RS] Slip into the next chain space and make a standing DC and another DC into the space. Chain 3 and make 2 more DC in the same space. (2 DC in next chain space, chain 3, 2 more DC in same space) Repeat around.  Slip to the top of the first standing stitch.
4. [RS] Slip into the next chain space and make a standing DC and another 2 DC into the space.  Chain 3 and make 3 more DC in the same space.  (3 DC in the next chain space, chain 3, 3 more DC in the same space) Repeat around (12 total leaves). Slip to the top of the first standing stitch.
5. [RS] Make a standing DC in the top of the previous one from round 4.  Into the next chain space, work 3 DC, chain 3, 3 DC. Work 1 DC in the back loop of the next DC from previous round. (Skip 4 stitches and work into the back loop of the 5th stitch 1 DC.  Into the chain space work 3 DC, chain 3, 3 DC.  Work 1 more DC into the back loop of the next DC from previous round) Repeat 7 more times for a total of 9 clusters, leaving three unworked where the smaller leaves and stem will be.  In the last repetition, place the last DC over to the left between clusters to create a straight edge.
6. [Wrong Side] Turn work and make a standing stitch (you are no longer working in the round).  Skip to the chain space and work: 3 DC, chain 3, 3 DC.  Then work  DC into the front loop of the next two stitches.  (Skip 4 stitches and work into the front loops of the 5th and 6th stitches, placing 1 DC into each.  In the chain space, work 3 DC, chain 3, 3 DC.  Work a DC in the front loop of each of the next two stitches.)  Repeat 7 more times for 9 total leaves.  In the last repetition, omit 2 DC from the edge (3 in the chain space, and 1 more into the standing stitch from the previous round for straight edge).
7. [Right Side] Chain 1 and turn.   Do not work the same stitch that you've chained in, and also skip 1 more stitch.  Sc 2.  Into the chains of the chain space, work 1 slip stitch into each chain very loosely.  5 more sc along the top.  At the beginning of the second cluster, DC in the first stitch, then skip 2 stitches and place 1 DC BLO in the last stitch before the chain space.  Into the chain space and work: 3 DC, chain 3, 3 DC.  DC into the next 3 stitches BLO. (Skip 4 stitches and work into the back loop of the 5th, 6th, and 7th stitch 1 DC each.  Into the chain space work 3 DC, chain 3, 3 DC.  Work 3 more DC into the back loops of the next 3 stitches.)  Repeat 5 more times.  In the last repetition, work the chain space, then place only 1 DC next to it and place the last DC over to the left (skip 3 stitches) between clusters to create a straight edge.
8. [Wrong Side] Turn work and make standing DC.  Skip 3 stitches and work 1 DC into the next stitch FLO. Into the chain space, work 3 DC, chain 3, 3 DC.  Work 4 DC in the front loops in the next 4 stitches.  (Skip 4 stitches and work into the back loop of the 5th, 6th, 7th, and 8ths stitch 1 DC each.  Into the chain space work 3 DC, chain 3, 3 DC.  Work 4 more DC into the back loops of the next 4 stitches.)  Repeat 5 more times for 7 total leaves.  In the last repetition, place 1 DC after the chain space and the last DC over to the left between clusters (skip 3 stitches) to create a straight edge.
9. [Right Side] Chain 1 and turn.  Do not work the same stitch that you've chained in, and also skip 1 more stitch.  Sc 3.  Into the chains of the chain space, work 1 slip stitch into each chain very loosely.  7 more sc along the top.  At the beginning of the second cluster, DC BLO, then skip 3 stitches and work 3 BLO DCs.  Into the chain space and work: 3 DC, chain 3, 3 DC.  DC BLO into the next 5 stitches. (Skip 4 stitches and work 5 DC into the back loop of the 5th, 6th, 7th, 8th, and 9th stitch (1 DC in each).  Into the chain space work 3 DC, chain 3, 3 DC.  Work 5 more DC into the back loops of the next 5 stitches.)  Repeat 3 more times for a total of 5.  In the last repetition, place 3 DC after the last chain space, skip 3 and place 1 more over to the left between clusters to create a straight edge.
10. [Wrong Side]  Turn work and make standing DC.  Skip 3 stitches and work 3 DC FLO.  Into the chain space, work 3 DC, chain 3, 3 DC.  Work 6 DC in the front loops in the next 6 stitches.  (Skip 4 stitches and work into the front loop of the 5th, 6th, 7th, 8th, 9th and 10th stitch 1 DC each.  Into the chain space work 3 DC, chain 3, 3 DC.  Work 6 more DC into the back loops of the next 6 stitches.)  Repeat 3 more times.  In the last repetition, place only 5 DC and one last DC over to the left between clusters to create a straight edge.
11. [Right Side] Chain 1 and turn. Do not work the same stitch that you've chained in, and also skip 1 more stitch. Sc 5. Into the chains of the chain space, work 1 slip stitch into each chain very loosely.  9 more sc along the top.  At the beginning of the second cluster, DC BLO, then skip 3 stitches and work 5 BLO DCs.  Into the chain space and work: 3 DC, chain 3, 3 DC.  DC BLO into the next 7 stitches. (Skip 4 stitches and work 7 DC into the back loop of the next 7 stitches (1 DC in each).  Into the chain space work 3 DC, chain 3, 3 DC.  Work 7 more DC into the back loops of the next 7 stitches.)  Repeat 1 more time.  In the last repetition, place 8 DC after the last chain space, skip 3 and place 1 more over to the left between clusters to create a straight edge.
12. [Wrong Side] Turn work and make standing DC.  Skip 3 stitches and work 5 DC FLO. Into the chain space, work 3 DC, chain 3, 3 DC.  Work 8 DC in the front loops in the next 8 stitches.(Skip 4 stitches and work into the front loop of the next 8 stitches (1 DC each). Into the chain space work 3 DC, chain 3, 3 DC. Work 8 more DC into the back loops of the next 8 stitches.)Repeat 1 more time.In the last repetition, place only 5 DC and one last DC over to the left between clusters to create a straight edge.
13. [Right Side]  Chain 1 and turn.  Do not work the same stitch that you've chained in, and also skip 1 more stitch.  Sc 7.  Into the chains of the chain space, work 1 slip stitch into each chain very loosely.  11 more sc along the top.  At the beginning of the second cluster, DC BLO, then skip 3 stitches and work 7 BLO DCs.  Into the chain space and work: 3 DC, chain 3, 3 DC.  DC BLO into the next 7 stitches, skip 3 and place 1 more DC.
14. [Wrong Side] Turn work and make standing DC.  Skip 3 stitches and work 7 DC FLO. Into the chain space, work 3 DC, chain 3, 3 DC.  Work 7 more FLO DC, skip 3 stitches and place a last DC.
15. (This will get a bit wordy, so use your best judgement following this pattern and the diagram: In the top of double crochets, work a single crochet.  In chain spaces, work 2 sc, picot, 2 sc.  Down the side of standing stitches and double crochets, place 2 sc in each.  On the right half of the leaf, you'll only want to place 3.)  Chain 1 and turn. Skip 1 stitch and sc 9.  In the chain space, sc 2, picot, sc 2.  SC 10 down the other side. Sc 4 down the side of the 2 standing stitches (2 each around the DCs like working into a chain space).  Sc 11 up the next side, sc 2, picot, sc 2 in the chain space.  8 sc down the side.  4 sc down the side of the 2 standing stitches. Sc 9 up the next side, work chains space, sc 6.  4 sc down the side of the 2 standing stitches.  Sc 7, work the next chain space.  Sc 4 and work 4 down the side of the 2 standing stitches.  Sc 5, work the chain space. Sc 3, work 4 into the 2 standing stitches.  Sc 3, work the chain space, sc 3.  Sc 3, 2 sc in the chain space, chain X, then slip back X-1.  2 more sc in the chains space.  Sc 6, work chain space.  Sc 3, sc 4 up the 2 standing stitches.  3 sc, chain space, 5 sc.  3 sc up the standing stitches. 4 sc, chain space, 7sc.  3 up the standing stitches.  6 sc, work the chain space, 9 sc,  3 sc up the standing stitches.  8 sc, work the chain space, 10 sc. 3 up the standing stitches.  Finish with an invisible join.

P.S. A special hello to you if you came from Moogly or PetalstoPicots.  I love seeing everybody's projects there!

Handle your shit, Fabious, please.

One of my favorite things to do when I'm feeling down is to rewatch funny movies.  One of our favorites is Your Highness.  I've stitched a little tribute to Danny McBride and James Franco.

It's my first real finished cross stitch piece and I'm pleased with it, although it's not perfect.  I finally bought a frame for it last night.  It probably needs to be ironed a bit more but I wanted to get it up on the wall.

I designed the font myself based on the opening credits from the movie and it took a bit of work to get it right.  I thought about including a little something from the scene but I'm not too confident in my stitching skills just yet.

My pattern I worked from with the little drawing included:

Crochet Peacock Feather Earrings Design

This has been on my idea list for a long long time.  I'm trying to work through the list instead of just adding new ideas to it.  It's meant to be a revolving door, not a bottomless pit.

So the basic design for this will use the pattern for a simple crocheted circle, but I'll switch out stitch types to shape it and keep the stitch count for each row the same.  I may add some spike stitches for the light blue row and some longer stitches for the top of the last row to join it into the feather top.  I want to add some of the long dangly feather parts later and I'm thinking of doing them as a strip of broomstick lace like I use for doll hair sometimes.

I plan on using embroidery floss (not sure on the strand count yet) to make it small and intricate.  I may add a piece of wire partway through to add stability but I'll see how that goes.

Considering working in the back loops only to make a more pronounced color change.

I want to alternate each row where the increases are to make it more circular and less angular.

Draft Diagram:

Scrap yarn prototype:

Don't think I followed through on row three with my changes to include some triple crochets, and I'm not sure if the final round is better off with hdc or dc at the widest part.

Written pattern: (possible BLOs throughout for color changes)

1. 12 DC in ring [dark blue]
2. (HDC 2 in next)x2, (DC 2 in next)x8, (HDC 2 in next)x2 [darkblue]
3. Sc 1, sc 2 in next, (HDC 1, 2 in next)x3, DC 1, DC 2 in next, (TRC 1, 2 in next)x2, DC 1, DC 2 in next, (HDC 1, 2 in next)x3, Sc 1, sc 2 in next [light blue] (consider spike stitches at beginning and end of round)
4. (Sc 2 in next, sc 2)x2, (HDC 2 in next, HDC 2)x2, DC 2 in next, DC 2, (TRC 2 in next, TRC 2)x2, DC 2 in next, DC 2, (HDC 2 in next, HDC 2)x2, (Sc 2 in next, sc 2)x2 [gold or yellow]
5. (Sc 3, sc 2 in next)x3, (HDC 3, HDC 2 in next)x6, (Sc 3, sc 2 in next)x3 [green] (consider longer stitches at beginning and end of round)
6. Make some basic broomstick lace in green and add around - attach findings for earrings.

Now I just need to actually find some time and actually make them!

Actually working on something the next day and my mind hasn't wondered off to other projects.  Strange.

Thoughts...

• I like the colors.  They are I think all DMC.  796, 132A, 581, and 90A.  I have a darker green in 580 that I might use for the tassles.
• Alternating increases and BLO work has giving it a nice detail.  I also used a invisible color change/join.  I like that except for the first 2 rows, all the colors are done in one row each but I could change that.
• I used a size 1.10mm hook, mostly because I couldn't put my hand on the 1mm I wanted and the .85 was too small.  I think a slightly smaller hook will make it more compact and professional looking.
• Not sure on the final shape... the triple stitches don't hold their shape super well.  Maybe some blocking a smaller hook will change that.  I think the gold row could use some more longer stitches.

New version with 4 strands held together:

Thoughts:

• This is what I get for being so picky - now maybe it's too big - try just 3 strands held together?
• Spike stitches should go all the way down to the center and maybe add 1 or 2 more?
• Thing at the top didn't work, need more building up in surrounding stitches - also should I add a point at the bottom?
• Still using 1.10mm hook and it works much better with more thread.

First and second version together:

Easy Double Crochet Rings

(Hey guys - special shout out to those visiting from crochet concupiscence!)

This method uses the double crochet foundation row method with a slight variation.  For the standard DCFR (double crochet foundation row), you pull up an extra loop (or chain 1) before completing each double crochet so you can avoid chaining at the beginning of a project.  (You can also use SC or HDC for this!)

In order to make a ring with a hole in the middle, you alternate chaining one before the double crochet and omitting the chain to create a DC2tog stitch.  This is for the smallest size you can make (24 stitches).  This is replicating row 2 of a typical circular crochet pattern (DC 12 in a ring, DC 2 in each DC from round 1).

You can use this method to make any size ring.  Figure out which row you would be on and what the total stitches would be, as well as what the pattern would be, and work that as a foundation row rather than into a row below.

So for example, to make a ring with 120 stitches (row 10 of a typical flat, circular crochet project), you would make a DCFR with the following pattern: Chain 3, DC in the first chain (your first inc is complete), DC 8, (inc, DC 8) x5.

This leaves you with a nice finished edge on the outside and inside, and you don't have to chain to start.  Variations on this pattern are endless.

Crochet Sugar Maple Leaves

I wanted to crochet some pretty Fall leaves but surprisingly there are few realistic leaf patterns out there.  I took a little time and made my own pattern for my favorite, the sugar maple leaf.

This pattern is worked in four rounds: 1 - a circle to start the shape, 2 - start the arms of the leaf, 3 - work around the arms to fill out the shape, and 4 - finish the shape with a stem and points.  It's not quite perfect, so it's more of a free form design with some basic guidelines.

Stitch Diagram:

And some basic instructions for the rows:  For the first stitch in each row either chain to the appropriate height or do a standing stitch.  In the second row where you are chaining and slipping into the chains, do it loosely so you can work into every stitch.  My pattern writing can be kind of confusing so follow along with the pictures and the diagram.  If you're a visual learner, I highly suggest learning how to read stitch diagrams.

The orange leaf was made with Paton's Grace and a size 2.75mm hook and the red was made with size 3 crochet thread.  You could use any yarn and hook size and color you want.  Have fun!

1. 12 DC in a magic ring, slip to top of first DC
2. 2 DC in the first 3 stitches of prv row.
   Arm 1: Chain 11 and slip into chains (leave the first and last chain unworked), then 2 DC in the next 3 stitches.
   Top arm: DC in the next stitch, chain 10, 9 slips back, DC in the same stitch.  2 DC in the next 3 stitches.
   Arm 2: Chain 10, slip back 9, then chain 1.   In the next 2 stitches, work 2 DC.  Slip into the top of the first DC
3. DC in the first 5 stitches (2DC, DC, 2 DC, DC, 2DC), (here there will appear to be too many spaces, you can crochet a few stitches together to close the space) then DC up the first arm 10 DC.
   In the top of the arm, DC 5 in the same space, back down the other side, DC 4, then DC 7 together (5 from the arm and 2 from the wheel).  DC in the next 2 stitches (you can put in a few extra stitches here if the finished pattern won't lay flat).
   Then DC 4 together (2 from the wheel, 2 from the top arm).  DC up the top arm (7), 5 DC in the top, DC down the side 7 DC, DC 4 together (2 from arm, 2 from wheel).  DC in next 2, DC 7 tog (2 from wheel, 5 from arm).
   4 DC up the 2nd arm, 5 together in the top, 10 DC down the arm.
   In the wheel: DC, 2DC, DC, slip to first DC.
4. 2 HDC tog in next 2 stitches,
   To make the stem, chain 9, slip back 8 (you can make this stem as long of short as you like)
   2 HDC tog in the next 2 stitches, DC, TC, in the next stitch, TC, picot, TC, then 3HCD, 2DC, TC, DC, picot, HDC
   Arm 1: 3sc, sc & DC together, picot, sc & DC together, in the next stitch TC, Picot, TC, DC & sc tog, in the next stitch DC, picot, HDC, then 3 HDC in the next 3 stitches.
   In between the arms: work 7 DC together.  If you put more stitches in this part in the row below, just work the middle 7 together and work extra stitches on either side.
   For the top arm: DC up the arm (5DC), then in the top 5 stitches work the following clusters: 1. DC, TC, picot 2. 2DC, 3. TC, picot, TC, 4. 2DC, 5. TC, picot, TC.
   DC back down the other side of the arm (5 DC), then work 7 DC together between the top and 2nd arm.
   For the last arm: 3 HDC up the side, then in the top 5 stitches: 1.) HDC, DC, picot, 2.) sc, DC, 3.) TC, picot, TC 4.) DC, sc, 5.) DC, picot, sc.  Then 3 sc in a row, HDC, picot, DC, TC, 2 DC.  3 HDC, in the next stitch TC, picot, TC.  TC, DC, and slip to the top of the first stitch.  (I like to finish my last stitch and then pull it through and weave it into the first stitch with a needle for a perfect edge.

Finishing the leaf: I wet blocked my examples and pulled the picots out gently to get a fine point.

My Super Boring Hobby

I have a lot of 'boring' hobbies that involve staying inside and slapping around pieces of things until they make something else.  I have to restrain my excitement when I talk to people about what I do with my free time, because to most people, this is the equivalent of watching paint dry.  I love it though!  This is one of those hobbies.

Whenever I find a cool free crochet pattern online, I like to make a diagram of it for fun.  I like making little pictures and understanding construction through graphics.

Here's an example from Moogly's Fortune's Wrap.

Row 1 says to chain 6, dc in the 4th chain, chain 1 & skip a chain, then dc in the last chain.  So I draw my little yarn tail, 6 chains, dc, chain, and dc.  Sometimes I like to fade the colors of each step so you can tell what order you're doing things and what direction you're going.

Row 1

Then for this pattern, you turn your work, so I turn the graphic around and turn it 90 degrees to the right so I'm ready for the next row.

Row 2 says to chain 6, dc in the 4th chain from the hook, chain 1 & skip the next stitch, then dc in the last ch so first I make that part in blue.  Then you put a slip stitch, chain, double crochet, chain 1, double crochet in the chain 3 space from the first row, so I put that in a different color.

Woo so fun!

I have no more love to give today.

Very rough draft of darling Malory.

Welcome to Mos Eisley

If I ever move to Mos Eisley I think I would make this and hang it on my wall.  It's important to be proud of your home.

Just the text pattern:

Just the city pattern - not sure how I would do this part:

Bonus geek alphabet:

Mythosaur Knitting Project

My current project is a birthday present for a friend.  I've done one piece already and blocked it up - that one was tunisian crochet with a different symbol.  For this one I wanted to try out knitting a big rectangle and then using a duplicate knit stitch for my color work.  It doesn't matter if it's crochet or tunisian or knitting, changing colors is a huge hassle.  Also, different mediums have different dimensions so my original pattern meant for tunisian isn't going to work for knitting.  Is there such a thing as knitting graph paper?  My stockinette knit stitches are much shorter than crochet or tunisian stitches (and normal tunisian stitches turned out taller than tunisian knit stitches - why can't everything just be nice and square?).  I have a feeling that cross stitch and I are going to be the best of friends once I get around to actually working on the patterns I've made.  Too many ideas and not enough time.

My stitches seem like they're about 20 per 4 inches in a column and about 15 per 4 inches in a row so I'm going to set my excel sheet up for 40 pixel columns and 30 pixel rows and overlay a picture and place my stitches.

Using my same width of 41 stitches wide (plus 2 for each side = 45 total), the length comes out to 69 stitches high plus some garter stitch on the top and bottom.  I've got my rectangle made now so I just have to see how the shape comes out once the duplicate stitches are placed.  Are you supposed to block before or after you do duplicate stitch?....

Honeycomb Blanket

If I ever get around to making another blanket, I would love to make one based off of the look of honeycomb.  I could do the traditional hexagon, but it might look better to do the first two rows as circles and then add in a third round to make it hexagonal.

So row 1 would be 12 dc in a ring
Row 2, 24 dc (inc in each dc)
Row 3 would be each side consisting of (chain 1, dc in the space, 4 dc, dc in the space, chain 1)

Might need a few half doubles in the middle of the outside row sections or maybe work the last round in singles....

All I have with me today is blue yarn.  It would be totally sweet if honeycomb was blue.